Return to BMW 3 Series

BMW M3 GT2 Street (E92)


BMW M3 GT2 Street (E92) is Minichamps’ road-style interpretation of the BMW M3 GT2 racing car rather than a separate road-going production model manufactured by BMW. The 2009 M3 GT2 was developed from the E92 M3 for the American Le Mans Series and differed dramatically from the regular M3 Coupé through its widened bodywork, large rear wing and extreme competition aerodynamics. The Minichamps Street version removes the racing livery, sponsor logos and competition numbers, leaving the purposeful technical form of the GT2 clearly visible.

From E92 M3 to GT2 racing car

BMW unveiled the racing version of the new M3 at the Chicago Auto Show in February 2008. The car was developed specifically for the GT2 class of the 2009 American Le Mans Series, with BMW Rahal Letterman Racing running the factory programme. Although based on the fourth-generation E92 M3, the car was extensively redesigned for circuit competition. Its widened body, advanced aerodynamics, racing suspension, safety cage and specialised drivetrain made it fundamentally different from the road-going M3.

485 hp V8

The M3 GT2 used a BMW Motorsport P65 V8 derived from the S65 engine of the production E92 M3. Displacement remained at 3,999 cc, while BMW quoted an output of 357 kW, or 485 hp. Although the increase over the 420 hp production M3 was relatively modest, the racing engine’s management, exhaust system and associated drivetrain were developed specifically for endurance competition. Power was delivered to the rear wheels through a six-speed sequential transmission.

Approximately 1,150 kilograms

One of the GT2’s greatest advantages over the production M3 was its substantially reduced weight. BMW M gives a figure of approximately 1,150 kilograms. The basic structure remained a steel unitary body, reinforced by a full welded safety cage, while numerous exterior panels – including the front and rear aprons, bonnet, doors and wheel-arch extensions – were made from carbon-fibre-reinforced plastic. All unnecessary road-car equipment was removed in the pursuit of lower weight and greater performance.

Aerodynamics developed for the circuit

The appearance of the M3 GT2 was defined by functional racing aerodynamics. Exceptionally wide wheel arches, a deep front apron, extensive cooling openings and a large rear wing made it far more aggressive than the standard E92 M3. These features generated the required downforce at racing speeds while also directing cooling air towards the engine, brakes and other competition components. This uncompromising body shape is also the defining visual feature of the Minichamps Street interpretation.

Six-speed sequential transmission

The BMW M3 GT2 used a six-speed sequential racing gearbox with straight-cut gears and a Quick-Shift system designed for extremely rapid changes. The drivetrain also incorporated a carbon-fibre clutch and a mechanical limited-slip differential. Suspension, brakes and steering were developed specifically for competition, leaving relatively little of the regular E92 M3 beyond its fundamental architecture.

American Le Mans Series debut

The M3 GT2 made its competition debut in the 2009 American Le Mans Series. BMW Rahal Letterman Racing entered two cars, and the first season already demonstrated the potential of BMW’s new GT racer. In subsequent years the car was further developed for competition in both North America and Europe, appearing at major endurance races including Le Mans, Spa and the Nürburgring 24 Hours.

Nürburgring 24 Hours victory

One of the most important achievements in the M3 GT2’s career came in 2010, when BMW Motorsport won the Nürburgring 24 Hours with the car. It was BMW’s nineteenth overall victory in the legendary endurance race and confirmed the capabilities of the E92-based racing car beyond the American Le Mans Series. The M3 GT2 consequently became one of BMW’s most significant factory competition cars of the late 2000s and early 2010s.

Street – a Minichamps interpretation

BMW never offered an official road-going production model called the M3 GT2 Street. Minichamps used the Street designation for an un-liveried interpretation of the racing car without sponsor decals or competition markings. It is therefore best understood as a road-style presentation of the M3 GT2 rather than a BMW homologation special or limited-production road car. Without racing graphics, the widened wheel arches, aerodynamic bodywork and competition proportions of the GT2 become particularly clear.

Model in the collection

The BMW M3 GT2 Street (E92) model in my collection was produced by Minichamps. It represents a 2009 Street interpretation based on the M3 GT2 racing car, presented without the sponsor graphics and competition markings of the race version. Production was limited to a total of 1,536 pieces.

Technical data at a glance

Real car on which the model is based: BMW M3 GT2 (E92)
Unveiled: 2008 Chicago Auto Show
Competition debut: 2009 American Le Mans Series
Body style: two-door GT2 racing coupé
Engine: naturally aspirated P65 V8 petrol engine
Displacement: 3,999 cc
Power output: 357 kW / 485 hp
Transmission: 6-speed sequential racing gearbox
Drive: rear-wheel drive
Differential: mechanical limited-slip differential
Weight: approximately 1,150 kg, depending on regulations and configuration
Road version: no official BMW M3 GT2 Street production model was offered
Special feature: an E92 M3-based GT2 racing car developed for the ALMS with extensively widened bodywork and competition aerodynamics

Photo of the real car. Photo: Tony / Flickr / Wikimedia Commons, CC BY-SA 2.0